-
ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.2026-04-30
-
ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.2026-04-30
-
ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel2026-04-17 -
ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A2026-04-10
-
As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure2026-03-31
EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel plate Normalizing, P275 NL1 steel plate/sheet
Material: P 275 NL1
Standard: DIN ENH 10028-3 Flat products made of steels for pressure purposes
Steel Group: structural steel
Note: with specified elevated temperature properties of non alloy and alloy steel
Dimension:
Thickness 5-300mm, Width 1500-3500mm, Length 3000-12000mm
EN 10028-3 P275 NL1 steel
Email:[email protected]
P275NL1 steel plate Introduction and application:
P275NL1 steel plate in a boiler and pressure vessel steel, P275NL1 steel plate have definite characteristic, have very good solderability. P275NL1 steel plate is mainly used for manufacturing boiler and pressure vessel, also can make transportation pipe.
P275NL1 steel chemical composition:
|
Grade |
C. % |
Mn. % |
S. ≤ |
N |
Cu |
Si. |
P. m≤ |
AL. |
Vi |
|
P275NL1 |
0.08-0.20 |
0.90-1.50 |
0.015 |
≤0.012 |
≤0.30 |
≤0.40 |
0.025 |
≤0.020 |
≤0.02 |
Bebon InternationalP275NL1 steel plate stock to you,as a professional Chinese exporters, P275NL1 steel plate quality assurance, welcome to the advisory.
Tags: EN 10028-3 P275 NH steel, EN 10028-3 P275 N steel, EN 10028-2 P355 GH steel