-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
EN 10028-3 P275 N steel plate/sheet, P275 N steel plate Normalizing, P275 N steel plate/sheet
Material: P 275 N
Standard: DIN EN 10028-3 Flat products made of steels for pressure purposes
Steel Group: structural steel
Note: with specified elevated temperature properties of non alloy and alloy steel
Dimension:
Thickness 5-300mm, Width 1500-3500mm, Length 3000-12000mm
EN 10028-3 P275 N steel
Email:[email protected]
P275N steel plate Introduction and application:
P275N steel plate in a boiler and pressure vessel steel, P275N steel plate have definite characteristic, have very good solderability. P275N steel plate is mainly used for manufacturing boiler and pressure vessel, also can make transportation pipe.
P275N steel chemical composition:
|
Grade |
C. % |
Mn. % |
S. ≤ |
N |
Cu |
Si. |
P. m≤ |
AL. |
Vi |
|
P275N |
0.08-0.20 |
0.90-1.50 |
0.015 |
≤0.012 |
≤0.30 |
≤0.40 |
0.025 |
≤0.020 |
≤0.02 |
Bebon International P275N steel plate stock to you,as a professional Chinese exporters, P275N steel plate quality assurance, welcome to the advisory.
Tags: EN 10028-2 P355 GH steel, EN 10028-2 P295 GH steel, EN 10028-2 P265 GH steel