Weldability Analysis of ASTM A202 Grade B Stee

ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.

2026-04-30
Mechanical Properties of ASTM A202 Grade A Ste

ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.

2026-04-30
ASTM A202 Pressure Vessel Steel Plate

ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel

2026-04-17
ASTM A204/A204M Grade B molybdenum alloy steel

ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A

2026-04-10
ASTM A204 Gr.A Molybdenum Alloy Pressure Vesse

As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure

2026-03-31

Need advice, or a quote?

P275NL1 steel plate, P275NL1 steel mechanical properties

P275NL1 steel is a pressure vessel steel designed for low temperature use. This is done through the reduction of phosphorus and sulphur in the steel. We have one of Europe’s largest stocks of P275NL1 available for immediate dispatch . It is also one of the best as it relies extensively on material supplied by Dillinger Hutte whose steel is world famous for its ultra low phosphorous and sulphur content.

P275NL1 steel

P275NL1 steel specification:

Thickness: 5mm to 300mm,Width: 1500mm to 4050mm,Length: 3000mm to 15000mm

P275NL1 steel Chemical analysis -% by mass*:

Grades

max

Si max

Mn.

max

min

Cr max

Cu max

Mo max

Ni max

Nb max

Ti max

max

P275NL1

0.16

0.4

0.80-1.50

0.03

0.015

0.012

0.02

0.3

0.08

0.5

0.05

0.03

0.05

P275NL1 steel mechanical properties:

Grade		P275NL1 Mechanical Property
Grade	Thickness	Yield	Tensile	Elongation	Impact Energy(KV J) min
P275NL1	mm	Min Mpa	Mpa	Min %	-20°	0°	+20°
	≤ 16	275	390-510	24	47	55	63
	16> to ≤35	275	390-510	24	47	55	63
	35> to ≤50	265	390-510	24	47	55	63
	50> to ≤70	255	390-510	24	47	55	63
	70> to ≤100	235	370-490	23	47	55	63
	100> to ≤150	235	350-470	23	47	55	63

The equivalent grade of P275NL1:

P275NL1 steel plate/ sheet is in EN 10028-3 standard. The equal material of P275NL1 steel is: DIN 17102 St E 285, BS1501 224Gr.400.

P275NL1 steel surface treatment: Shot blasting and painting or coated

Main application of P275NL1 steel is used to build boilers and pressure vessels such as petroleum, chemical industry, power plants.

Bebon is a P275NL1 steel supplier, we can offer High quality steel plate and pretreatment of the advanced equipment. If you are interested in 1 P275NL1 steel Production Process, P275NL1 equivalent steel, please contact us.