-
ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.2026-04-30
-
ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.2026-04-30
-
ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel2026-04-17 -
ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A2026-04-10
-
As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure2026-03-31
EN 10028-3 P 355 NL2 steel, EN 10028-3 P 355 NL2 steel Available dimension
EN 10028-3 P 355 NL2 steel is characterised by a minimum yield strength of 275-460 N/mm2, by good weldability and high resistance to brittle cracking. EN 10028-3 P 355 NL2 steel is used above all for manufacturing vessels for pressurised gas (LPG, butane and propane tanks), pressure vessels, steam boiler parts, pressure piping, compressors ect.
EN 10028-3 P 355 NL2 steel Available dimension:
Hot-rolled coils unpickled, mill edge:
|
Thickn. in mm |
Width in mm |
|
2,00 – 2,24 |
900 –1400 |
|
2,25 – 2,49 |
900 –1450 |
|
2,50 – 2,99 |
900 –1500 |
|
3,00 – 3,99 |
900 –1680 |
|
4,00 – 6,00 |
900 –1750 |
|
6,01 –12,70 |
900 –1750 |
Hot-rolled slit strip:
|
Thickn. in mm |
Width in mm |
|
2,00 – 2,24 |
100 – 690 |
|
2,25 – 2,49 |
100 – 715 |
|
2,50 – 2,99 |
100 – 740 |
|
3,00 – 4,50 |
100 – 800 |
|
4,50 – 6,00 |
116 – 800 |
|
6,01 – 7,00 |
175 – 800 |
|
7,01 – 8,00 |
233 – 800 |
The pursuit of excellence in quality, all the time, is BEBON STEEL's goal. Good quality ensures your satisfaction. If the goods have any question, we can solve it for you immediately. So, if need EN 10028-3 P 355 NL2 steel, welcome to contact BEBON STEEL.