-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
DIN 17135 A St 35 steel, DIN 17135 A St 35 steel ex-stock
DIN 17135 A St 35 steel is a Germany specified steel for use in pressure vessels, boilers and heat exchangers, so, DIN 17135 A St 35 steel belongs to boilers and pressure vessels steel.
DIN 17135 A St 35 steel detailed information:
|
Composition |
C max |
Si max |
Mn. max |
P max |
S max |
N max |
AL min |
Cr max |
Cu max |
Mo max |
Ni max |
Nb max |
Ti max |
V max |
||||||
|
0.16 |
0.35 |
0.60-1.20 |
0.025 |
0.015 |
0.012 |
0.02 |
0.3 |
0.03 |
0.08 |
0.3 |
0.02 |
0.03 |
0.02 |
|||||||
|
Mechanical Property |
Thickness (mm) |
Yield StrengthMPa(min) |
Tensile StrengthMPa |
Elongation % (min) |
Impact Energy (KV J) (min) |
|||||
|
-20℃ |
0℃ |
20℃ |
||||||||
|
≤ 16 |
235 |
360 to 480 |
24 |
27 |
34 |
40 |
||||
|
16＜t ≤40 |
225 |
360 to 480 |
24 |
27 |
34 |
40 |
||||
|
40＜t ≤60 |
215 |
360 to 480 |
24 |
27 |
34 |
40 |
||||
|
6＜t ≤ 100 |
200 |
360 to 480 |
24 |
27 |
34 |
40 |
||||
|
100＜t ≤150 |
185 |
350 to 480 |
24 |
27 |
34 |
40 |
||||
|
150＜t ≤250 |
170 |
350 to 480 |
24 |
27 |
34 |
40 |
||||
DIN 17135 A St 35 steel is characterized by a minimum yield strength of 170-230MPa and by good weldability, so DIN 17135 A St 35 steel is mainly used to for manufacturing boilers, pressure vessels and pipes transporting hot liquids.
As a professional steel supplier, BEBON STEEL registers Hundreds of thousands of tons of DIN 17135 A St 35 steel ex-stock source on our spot trade flatform. If you are interested in DIN 17135 A St 35 steel, welcome to contact BEBON STEEL, look forward to cooperate with you.