-
ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.2026-04-30
-
ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.2026-04-30
-
ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel2026-04-17 -
ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A2026-04-10
-
As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure2026-03-31
DIN17135 A St 35, Grade A St 35, A St 35 steel
DIN17135 A St 35 steel is a kind of material for boiler and pressure vessel steel. So, DIN17135 A St 35 steel is used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.
Based on the chemical compositon and mechanical property, DIN17135 A St 35 steel is suitable for applications where elevated working temperatures are the norm and the material is used by fabricators throughout the oil, gas and petrochemical industry.
BEBON INTERNATIONAL is committed to steel processing and export. We have the most comprehensive service. One package service will be offered, including cutting,welding, drilling, shot blast cleaning, derusting, painting, galvanized, etc, our service will be around your requirement and ensure the perfect service. About DIN17135 A St 35 steel, we can offer the follow specification:
Round bar: Diameter : 1mm-2000mm
Square bar: 50mm * 50mm-600mm *600mm
Plate steel/flat bar: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement
DIN17135 A St 35 steel chemical composition:
|
Grades |
C max |
Si max |
Mn. max |
P max |
S max |
N max |
AL min |
Cr max |
Cu max |
Mo max |
Ni max |
Nb max |
Ti max |
V max |
|
A St 35 |
0.16 |
0.35 |
0.60-1.20 |
0.025 |
0.015 |
0.012 |
0.02 |
0.3 |
0.03 |
0.08 |
0.3 |
0.02 |
0.03 |
0.02 |
DIN17135 A St 35 steel mechanical property:
|
Grade |
Thickness (mm) |
Yield Strength MPa(min) |
Tensile Strength MPa |
Elongation % (min) |
Impact Energy (KV J) (min) |
||
|
-20℃ |
0℃ |
20℃ |
|||||
|
A St 35 |
≤ 16 |
235 |
360 to 480 |
24 |
27 |
34 |
40 |
|
16＜t ≤40 |
225 |
360 to 480 |
24 |
27 |
34 |
40 |
|
|
40＜t ≤60 |
215 |
360 to 480 |
24 |
27 |
34 |
40 |
|
|
6＜t ≤100 |
200 |
360 to 480 |
24 |
27 |
34 |
40 |
|
|
100＜t ≤150 |
185 |
350 to 480 |
24 |
27 |
34 |
40 |
|
|
150＜t ≤250 |
170 |
350 to 480 |
24 |
27 |
34 |
40 |
|
DIN17135 A St 35 equivalent material:
|
DIN17135 A St 35 equivalent material |
||||||
|
Europe |
Germany DIN |
Japan JIS G |
USA |
|||
|
EU 113 |
EN 10028-2 |
17165 |
17102 |
3115 |
3103 |
ASTM |
|
FeE255 KG KW,KT |
P235 GH |
HI |
St E 255 |
SPV 235 |
SB410 |
A285gr.A,B,C |