-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
EN 10028-3 P 355 NL1 steel, EN 10028-3 P 355 NL1 steel Available dimension
EN 10028-3 P 355 NL1 steel is characterised by a minimum yield strength of 275-460 N/mm2, by good weldability and high resistance to brittle cracking. EN 10028-3 P 355 NL1 steel is used above all for manufacturing vessels for pressurised gas (LPG, butane and propane tanks), pressure vessels, steam boiler parts, pressure piping, compressors ect.
EN 10028-3 P 355 NL1 steel Available dimension:
Hot-rolled coils unpickled, mill edge:
|
Thickn. in mm |
Width in mm |
|
2,00 – 2,24 |
900 –1400 |
|
2,25 – 2,49 |
900 –1450 |
|
2,50 – 2,99 |
900 –1500 |
|
3,00 – 3,99 |
900 –1680 |
|
4,00 – 6,00 |
900 –1750 |
|
6,01 –12,70 |
900 –1750 |
Hot-rolled slit strip:
|
Thickn. in mm |
Width in mm |
|
2,00 – 2,24 |
100 – 690 |
|
2,25 – 2,49 |
100 – 715 |
|
2,50 – 2,99 |
100 – 740 |
|
3,00 – 4,50 |
100 – 800 |
|
4,50 – 6,00 |
116 – 800 |
|
6,01 – 7,00 |
175 – 800 |
|
7,01 – 8,00 |
233 – 800 |
A large amount of EN 10028-3 P 355 NL1 steel ex-stock, detail chemical composition and mechanical property information, cheap price and so on, these are BEBON STEEL can service for you. Welcome to contact BEBON STEEL!