View allProduct
View allHOT News
-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
Need advice, or a quote?
EN 10028-2 P355 GH steel
EN 10028-2 P355GH steel is a carbon steel alloy engineered for use in pressurised service. It is used as a weldable material in the fabrication of pressure vessels and industrial boilers which are commonly found in petrochemical plants, oil refineries and gas installations.
EN 10028-2 P355GH steel Size:
Thickness: 8mm to 200mm
Width: 1500mm to 4200mm
Length: 4000mm to 18000mm
|
EN 10028-2 P355GH Chemical Composition |
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
Al(min) |
N |
|
|
P355GH |
0.10-0.22 |
0.60 |
1.10-1.70 |
0.025 |
0.015 |
0.020 |
0.012 |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
|
0.30 |
0.30 |
0.08 |
0.040 |
0.30 |
0.03 |
0.02 |
|
Carbon Equivalent: Ceq = [C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15]%
|
Grade |
|
EN10028-2 P355GH Mechanical Property |
|||||
|
Thickness |
Yield |
Tensilmie |
Elongation |
Impact Energy(KV J) min |
|||
|
P355GH |
mm |
Min Mpa |
Mpa |
Min % |
-20° |
0° |
+20° |
|
≤ 16 |
355 |
510-650 |
20 |
27 |
34 |
40 |
|
|
16> to ≤40 |
345 |
510-650 |
20 |
27 |
34 |
40 |
|
|
40> to ≤60 |
335 |
510-650 |
20 |
27 |
34 |
40 |
|
|
60> to ≤100 |
315 |
490-630 |
20 |
27 |
34 |
40 |
|
|
100> to ≤150 |
295 |
480-630 |
20 |
27 |
34 |
40 |
|
|
150> to ≤250 |
280 |
470-630 |
20 |
27 |
34 |
40 |
|
If you are interested in EN10028-2 P355GH steel ,please contact us!