-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
EN 10028-2 P235 GH steel plate/sheet, P235 GH steel plate Normalizing, P235 GH steel plate/sheet
Bebon International is a professional P235GH steel plate exporters, P235GH steel plates is characterised by a minimum yield strength of 170-230 MPa and by good weldability. More information about P235GH steel plate, please see the following.
Material: P235 GH
Standard: DIN EN 10028-2 Flat products made of steels for pressure purposes
Steel Group: structural steel
Note: with specified elevated temperature properties of non alloy and alloy steel
P235 GH steel size:
Thickness 5-300mm, Width 1500-3500mm, Length 3000-12000mm
EN 10028-2 P235 GH steel
Email:[email protected]
P235GH steel plate Introduction and application: P235GH steel plate in a boiler and pressure vessel steel, P235GH steel plate have definite characteristic, have very good solderability. P235GH steel plate is mainly used for manufacturing boiler and pressure vessel, also can make transportation pipe.
P235GH steel plate Chemical composition:
|
Grades |
C≤ |
Si≤ |
Mn. ≤ |
P≤ |
S≤ |
AL≥ |
Cr≤ |
Cu≤ |
Ni≤ |
Nb≤ |
|
P235GH |
0.16 |
0.35 |
0.60-1.20 |
0.025 |
0.015 |
0.02 |
0.3 |
0.03 |
0.3 |
0.02 |
Bebon International is a P235GH steel plate exporters, as the professional Chinese exporters, our P235GH steel plate quality is very good, welcome to the advisory.
Tags: ASTM A737gr.C steel,ASTM A737gr.B steel, ASTM A622gr.C steel