-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
EN 10028-2 P 265 GH steel, EN 10028-2 P 265 GH steel detailed data
EN 10028-2 P 265 GH steel is a kind of material for boiler and pressure vessel steel. So, EN 10028-2 P265GH steel is mainly used to manufacture boilers and vessels which often worked in harsh environment, especially, high pressure, this environment requirements on steel is relatively high.
EN 10028-2 P 265 GH steel detailed data
|
Nominal thickness (mm): |
to 100 |
100 - 150 |
150 - 250 |
|
|
|
|
|
|
Rm - Tensile strength (MPa) (+N) |
410-530 |
400-530 |
390-530 |
|
Nominal thickness (mm): |
to 16 |
16 - 40 |
40 - 60 |
60 - 100 |
100 - 150 |
150 - 250 |
|
|
|
|
|
|
|
|
|
ReH - Minimum yield strength (MPa) (+N) |
265 |
255 |
245 |
215 |
200 |
185 |
|
KV - Impact energy (J) transverse, (+N) |
-20° |
0° |
+20° |
|
KV - Impact energy (J) longitud., |
-10° |
0° |
+20° |
|
A - Min. elongation at fracture (%) (+N) |
22-23 |
|
A - Min. elongation at fracture (%) transverse, (+N) |
21 |
A large amount of EN 10028-2 P 265 GH steel ex-stock, detail chemical composition and mechanical property information, cheap price and so on, these are BEBON STEEL can service for you. Welcome to contact us!