-
ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.2026-04-30
-
ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.2026-04-30
-
ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel2026-04-17 -
ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A2026-04-10
-
As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure2026-03-31
ASTM A516 standard, ASTM A516 standard specification
ASTM A516 standard, also known as PVQ516 steel, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. ASTM A516 standard is intended primarily for service in welded pressure vessels where improved notch toughness is important. Plates 1.50” and under in thickness are normally supplied in the as-rolled condition. ASTM A516 standard may be ordered normalized or stress relieved, or both. Plates over 1.50” in thickness shall be normalized.
ASTM A516 standard
ASTM A516 standard specification:
|
all measurements in inches |
THICKNESS |
WIDTH |
LENGTH |
|
|
ASTM A516 |
|
|
|
|
|
Grade 55 |
3/16" – 6" |
48" – 120" |
96" – 480" |
|
|
Grade 60 |
3/16" – 6" |
48" – 120" |
96" – 480" |
|
|
Grade 65 |
3/16" – 6" |
48" – 120" |
96" – 480" |
|
|
Grade 70 |
3/16" – 6" |
48" – 120" |
96" – 480" |
|
BEBON is ASTM A516 standard supplier. We can produce ASTM A516 standard for the clients according to their special requirements.
If you are interested in ASTM A516 standard, please browse the web pages or contact us.