-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
ASTM A36 steel
ASTM A36 steel is a standard steel alloy that is a common structural steel in the United States. ASTM A36 steel standard was established by the standards organization ASTM International.
ASTM A36 steel
As with most steels, ASTM A36 steel has a density of 7,800 kg/m3 (0.28 lb/cu in). Young's modulus for ASTM A36 steel is 200 GPa (29,000,000 psi).ASTM A36 steel has a Poisson's ratio of 0.260, and a shear modulus of 79.3 GPa (11,500,000 psi).
ASTM A36 steel Fabricated forms:
Plate
Structural Shapes
Bar
Sheet
ASTM A36 steel in plates, bars, and shapes with a thickness of less than 8 in (203 mm) has a minimum yield strength of 36,000 psi (250 MPa) and ultimate tensile strength of 58,000–80,000 psi (400–550 MPa). Plates thicker than 8 in have a 32,000 psi (220 MPa) yield strength and the same ultimate tensile strength.The Electrical Resistance of ASTM A36 steel is 0.0000153 ohm/cm. ASTM A36 steel bars and shapes maintain their ultimate strength up to 650°F. Afterward, the minimum strength drops off from 58,000 psi: 54,000 psi at 700°F; 45,000 psi at 750°F; 37,000 psi at 800°F.
A large amount of ASTM A36 steel ex-stock, detail chemical composition and mechanical property information, cheap price and so on, these are BEBON can service for you. Welcome to contact us!
Tags: ASTM A633-E, ASTM A 283-C, ASTM A 283-D