Weldability Analysis of ASTM A202 Grade B Stee

ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.

2026-04-30
Mechanical Properties of ASTM A202 Grade A Ste

ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.

2026-04-30
ASTM A202 Pressure Vessel Steel Plate

ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel

2026-04-17
ASTM A204/A204M Grade B molybdenum alloy steel

ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A

2026-04-10
ASTM A204 Gr.A Molybdenum Alloy Pressure Vesse

As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure

2026-03-31

Need advice, or a quote?

P460NH steel plate,P460NH steel plate specification

P460NH steel

P460NH steel plate under EN 10028-3 standard, it is a kind of high yield boiler steel. P460NH is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which has specified elevated temperature properties (NH).

P460NH steel plate specification:

Steel Grade:P460NH Steel Standard: EN10028-3

Thickness: 8–30 mm, Width: Up to 3 metres wide, Length: Up to 12 metres Long

P460NH steel chemical requirements:

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

C	Si	Mn	P	S	Altotal	N	Cr
0.20	0.60	1.10-1.70	0.025	0.015	0.020 min	0.025	0.30
Cu	Mo	Nb	Ni	Ti	V	Nb+Ti+V
0.70	0.10	0.05	0.80	0.03	0.20	0.22

P460NH steel tensile requirements:

Product Thickness	Yield Strength MPa	Tensile Strength MPa	Elongation A%
up to 16 mm	460 min	570 to 730	17 min
16 to 40 mm	445 min	570 to 720	17 min
over 40 to 60 mm	430 min	570 to 720	17 min
over 60 to 100 mm	400 min	540 to 710	17 min

P460NH steel impact energy values for the normalised condition:

	-20 OC	0 OC	+20 OC
Transverse	30 J min	40 J min	50 J min
Longitudinal	45 J min	65 J min	75 J min

P460NH steel main application:

P460NH steel is widely used in manufacturing plants, general construction and all kinds of engineering machinery, such as mining and all kinds of engineering construction in the drill, excavator, electric wheel dump truck, mine car, excavators, loaders, bulldozers, cranes, hydraulic support in coal mine and other mechanical equipment and other structures.

P460NH steel heat treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technology, etc.

P460NH steel services: Cutting, Painting, Pretreatment, and The third party inspection in DNV, BV, LR, ABS, SGS ,etc and others in super thick ship steel plate.

We would do our best to serve you the most qualified P460NH steel. If you are interested in P460NH steel, Please don't hesitate to contact us.