-
ASTM A202 Grade B is a chromium-manganese-silicon low-alloy steel tailored for high-pressure, medium-temperature pressure vessel applications.2026-04-30
-
ASTM A202 Grade A is a critical chromium-manganese-silicon low-alloy steel plate specifically designed for welded pressure vessels and boilers operating at medium temperatures.2026-04-30
-
ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel2026-04-17 -
ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A2026-04-10
-
As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure2026-03-31
35CrMo alloy structural steel plate Chemical composition
35CrMo is a steel grade in GB/T 3077 standard. 35CrMo steel is a kind of alloy structural steel. 35CrMo steel plate is used for important component of high load works, such as transmission part of vehicle and Engine, steam turbine generator rotor, shaft, large section parts.
Chemical composition of 35CrMo alloy structural steel plate (%):
|
Grade
|
C |
Si |
Mn |
Cr |
Mo |
V |
|
35CrMo |
0.32-0.40 |
0.17-0.37 |
0.40-0.70 |
0.80-1.10 |
0.15-0.25 |
- |
Mechanical property of 35CrMo steel plate:
|
Grade
|
Thickness |
Yield |
Tensile |
|
35CrMo |
mm |
Min Mpa |
Mpa |
|
6-50 |
835 |
980 |
|
|
50-200 |
835 |
980 |
35CrMo steel plates’ quench-hardening ability is higher, no temper brittleness. The weld-ability of 35CrMo steel plate is quite good. The tendency of cold crack formation is very small, but machinability and cold straining plasticity is good.
More information about 35CrMo alloy structural steel plate, please feel free to contact us, we will always do our best to help you.